HEJNE 2 section shelving unit, softwood, 60 5/8x19 5/8x67 3/8 "

HEJNE 2 section shelving unit, softwood, 60 5/8x19 5/8x67 3/8 " — Assembly Overview

Shelving units are some of IKEA's most popular furniture for good reason — versatile, functional, and generally approachable. The HEJNE 2 section shelving unit, softwood, 60 5/8x19 5/8x67 3/8 " takes an average of 1 hour and 28 minutes according to 2 buyers who documented their assembly, with a moderate difficulty rating. The 8×1 configuration has 8 compartments, which adds panel count and alignment time compared to smaller units. Most people can tackle this build solo.

Why this build takes as long as it does

The 8×1 configuration means 8 individual shelf compartments, each requiring its own cam bolt connections and alignment. You're assembling roughly 10 interlocking panels — and each one needs to be seated correctly before the next. The back panel insertion is the most unforgiving step: at this scale, if the frame isn't square when you slide it in, you'll need to take things apart. Most of the time on large grid units goes into checking squareness and seating the back panel correctly.

⏱ Time Breakdown

Estimated split based on how real builds typically run

What usually slows people down

• !Keeping all 8 compartments aligned as the build grows — small errors compound across a large grid
• !Back panel insertion — it has to go in before the unit is stood up, and it locks the frame square
• !Sorting the high volume of cam locks, dowels, and shelf pins before starting
• !Wall anchoring — locating studs correctly and getting the anchor level takes more time than the assembly itself

🛠 How to Assemble It Faster

1. 1Sort all hardware before touching a panel — cam locks, dowels, and shelf pins look nearly identical. 5 minutes sorting saves 15 minutes hunting.
2. 2Read steps 3 and 4 before doing step 1. The back panel must slide in while the frame is flat — stand the unit up first and you're disassembling.
3. 3With 8 compartments, loosely connect all panels before tightening any — it's easier to square the whole frame at once than section by section.
4. 4Seat dowels with a rubber mallet, not a hammer. More control, far less risk of splitting laminate corners.

Step-by-Step Assembly Guide

1. 1Lay out all panels on a clean floor. Sort hardware into cam locks, dowels, shelf pins, and back panel nails.
2. 2Insert dowels into one side panel at all marked positions.
3. 3Slide any internal shelf dividers onto the dowels before attaching the second side panel.
4. 4Attach the second side panel, using a mallet to seat the dowels fully. Insert cam bolts and tighten.
5. 5Attach the top and bottom panels in the same way. Check squareness before tightening fully.
6. 6Slide the back panel into the groove and nail or staple it at each marked position.
7. 7Stand the unit upright and attach any feet. Wall-anchor before loading with heavy items.

Common mistakes to avoid

• ✕Not checking squareness before nailing in the back panel — the back panel is the only thing that squares the frame
• ✕Hammering the back panel nails in before all cam bolts are hand-tightened
• ✕Standing the unit upright before the back panel is secured — it will rack under its own weight
• ✕Skipping wall anchoring on units taller than 3 feet

Frequently Asked Questions

Compared to similar IKEA builds

Easier alternatives to consider

If you want less assembly time or complexity

If you prefer IKEA's design and price point, the original is still a solid choice — just budget the extra setup time.

What affects assembly time

Is this worth assembling yourself?

Yes — this is a reasonable DIY project. The main variable is how much IKEA furniture you've assembled before. First-timers should budget extra time and read the full manual before starting. An electric screwdriver turns a frustrating build into a manageable one.

More resources