PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 "
IKEA
Most people assemble the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " in about 1 hour and 35 minutes, based on 2 real buyers who logged their time on FlatPackTime. The build is rated moderate and can be done solo. If this is your first time with IKEA furniture, add 20–30% to the estimate.
A full-day project. Two people make this significantly more manageable — the frame needs to be held upright while hardware is inserted.
Just assembled this? Log your time
Log your assembly time
How long did it take you? Help future buyers plan.
Community reviews (1)
💬 Estimated from YouTube tutorials (5 videos)
More PAX products
🛒 Tools you'll need
Speed up your build — these are the most common tools IKEA assemblers reach for.
FlatPackTime earns a small commission on purchases — at no extra cost to you.
Don't want to spend about 1 hour and 35 minutes building the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 "?
Get matched with a local assembler
Tell us a bit about your PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " project and we'll connect you with someone nearby.
PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " — Assembly Overview
Wardrobes are among the most complex IKEA builds, and the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " lives up to that reputation. Buyers report an average assembly time of 1 hour and 35 minutes, with a moderate difficulty rating across 2 logged builds. Clear a full morning, have a second person ready, and read the manual before you start. The wall-anchoring step is not optional — a freestanding wardrobe this large is a safety hazard without it.
Why this build takes as long as it does
Wardrobes are among the most complex IKEA builds because they combine a large frame, interior fittings, and precision door alignment into a single project. The frame assembly is the structural foundation — everything else depends on it being square. Interior fittings (shelves, rails, drawers) are added last, once the frame is anchored and the doors are hanging correctly. Don't rush the door hinge adjustment: each hinge has 3-axis adjustment, and getting all of them to sit flush takes patience.
What usually slows people down
- !Trying to work alone — holding large side panels while inserting hardware is a two-person job
- !Door hinge alignment — each hinge has three axes of adjustment and all of them matter
- !Rushing the wall anchoring step — it takes time to locate studs and get the rail level
- !Not reading the manual before starting — wardrobes have sub-assemblies that must go in a specific order
Step-by-Step Assembly Guide
- 1Read the full manual before starting. Wardrobe builds have sub-assemblies that must be done in a specific order.
- 2Assemble the side panels: attach hinge brackets, shelf pins, and any interior rail mounts while the panel is flat.
- 3Stand the side panels and attach the top and bottom panels. Have a second person hold panels while you fasten.
- 4Attach the back panel to square the frame. This is structural — don't skip it.
- 5Install the wall anchor rail. Level it carefully — this affects whether doors close flush.
- 6Hang the doors or sliding tracks. Adjust hinges in all three axes until doors sit flush and level.
- 7Add interior fittings (shelves, drawers, clothes rails) last, once the frame is secured and anchored.
🛒 Tools that make this build easier
Recommended based on this product type
FlatPackTime earns a small commission on purchases — at no extra cost to you.
Common mistakes to avoid
- ✕Inserting the back panel before checking the frame is square — the back panel locks whatever shape the frame is in
- ✕Skipping or delaying the wall anchor — the wardrobe will shift over time without it
- ✕Adjusting door hinges before the frame is fully anchored — anchoring changes alignment slightly
- ✕Trying to stand the wardrobe before interior fittings are installed at the correct heights
Frequently Asked Questions
How long does the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " take to assemble?
Based on 2 real buyers who logged their build on FlatPackTime, the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " takes an average of 1 hour and 35 minutes to assemble. First-time assemblers typically take 20–40% longer than experienced builders, especially if they don't sort hardware before starting.
Can I assemble the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " alone?
Yes — the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " is rated moderate and most buyers complete it solo. Having a second person speeds things up, but it's not required for this build.
What tools do I need to assemble the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 "?
IKEA includes an allen key with the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 ", but an electric screwdriver is the single biggest time-saver. A rubber mallet helps seat dowels without marking the wood, and a bubble level catches alignment issues early. For a build this size, having all three tools ready before you start makes a real difference.
Is the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " worth assembling yourself?
At IKEA's price point, self-assembly is usually the practical choice. The PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 " is rated moderate — manageable for most people with a bit of patience.
Do I need to wall-anchor the PAX / BERGSBO Wardrobe, gray-beige/gray-beige, 59x23 5/8x93 1/8 "?
Yes — always wall-anchor tall wardrobes. This is a safety requirement, not just a suggestion. The wall rail also prevents the wardrobe from shifting forward when doors are opened repeatedly. IKEA includes the anchoring hardware in the box.
How do I align the PAX doors after assembly?
PAX hinges have 3-axis adjustment. Use a cross-head screwdriver on the hinge adjustment screws to move doors up/down, in/out, and side-to-side. Adjust one hinge at a time and test the door's swing after each adjustment. Getting all doors flush typically takes 20–30 minutes of careful tuning.