SKYTTA / PAX Walk-in wardrobe with sliding doors, black dark gray/Mehamn light blue, 108 5/8x63x80 1/2 "

SKYTTA / PAX Walk-in wardrobe with sliding doors, black dark gray/Mehamn light blue, 108 5/8x63x80 1/2 " — Assembly Overview

Wardrobes are among the most complex IKEA builds, and the SKYTTA / PAX Walk-in wardrobe with sliding doors, black dark gray/Mehamn light blue, 108 5/8x63x80 1/2 " lives up to that reputation. Buyers report an average assembly time of 1 hour and 23 minutes, with a moderate difficulty rating across 2 logged builds. Clear a full morning, have a second person ready, and read the manual before you start. The wall-anchoring step is not optional — a freestanding wardrobe this large is a safety hazard without it.

Why this build takes as long as it does

Sliding door wardrobes take longer than hinged-door versions because the track system has to be installed and leveled precisely — the doors won't glide correctly if the top track is even slightly off. This is the step most people have to redo at least once. Plan extra time for track alignment and test the full sliding range before calling it done.

⏱ Time Breakdown

Estimated split based on how real builds typically run

What usually slows people down

• !Trying to work alone — holding large side panels while inserting hardware is a two-person job
• !Getting the sliding track level — even a small misalignment causes persistent friction
• !Rushing the wall anchoring step — it takes time to locate studs and get the rail level
• !Not reading the manual before starting — wardrobes have sub-assemblies that must go in a specific order

🛠 How to Assemble It Faster

1. 1Prep both side panels completely — hinge brackets, shelf pins, interior rail mounts — while they're flat on the floor. Doing this after they're standing takes twice as long.
2. 2Install the wall anchor rail before touching the doors. Anchoring shifts the frame slightly; doors adjusted before anchoring will need readjusting.
3. 3Adjust one hinge axis at a time: up/down first, then depth, then side-to-side. Methodical beats fast here — chasing cascading misalignment costs more time.
4. 4Use a cross-head screwdriver with a long shaft for hinge screws — the short IKEA tool doesn't give enough torque and strips heads.

Step-by-Step Assembly Guide

1. 1Read the full manual before starting. Wardrobe builds have sub-assemblies that must be done in a specific order.
2. 2Assemble the side panels: attach hinge brackets, shelf pins, and any interior rail mounts while the panel is flat.
3. 3Stand the side panels and attach the top and bottom panels. Have a second person hold panels while you fasten.
4. 4Attach the back panel to square the frame. This is structural — don't skip it.
5. 5Install the wall anchor rail. Level it carefully — this affects whether doors close flush.
6. 6Hang the doors or sliding tracks. Adjust hinges in all three axes until doors sit flush and level.
7. 7Add interior fittings (shelves, drawers, clothes rails) last, once the frame is secured and anchored.

Common mistakes to avoid

• ✕Inserting the back panel before checking the frame is square — the back panel locks whatever shape the frame is in
• ✕Skipping or delaying the wall anchor — the wardrobe will shift over time without it
• ✕Adjusting door hinges before the frame is fully anchored — anchoring changes alignment slightly
• ✕Trying to stand the wardrobe before interior fittings are installed at the correct heights

Frequently Asked Questions

Compared to similar IKEA builds

Easier alternatives to consider

If you want less assembly time or complexity

If you prefer IKEA's design and price point, the original is still a solid choice — just budget the extra setup time.

What affects assembly time

Is this worth assembling yourself?

For most people, yes — but wardrobes are the category where professional assembly is most justifiable. The wall-anchoring step, door alignment, and physical size make this the most demanding category IKEA makes. If you're comfortable with a drill, have a second person, and can clear a full day, it's entirely doable. If any of those conditions aren't met, the cost of hiring a local assembler is often worth it.

More resources